Onrec logo The Online Recruitment Resource

5 Easy Steps of Combi Boiler Installation to Learn

If you're going to make a fireplace for the home, then you need to learn about setting the flue chimney. It is vital to know the type of flue for choosing a fire that is normally overlooked by everyone. Particular fires are made explicitly for vents and have adaptable performance.

There are different types of flues and should be implanted according to the ventilation points and rooftops. Some of them are:

Balanced flues

If your home doesn't have alternative for making fireplaces, then you should get a balanced flue which can easily be used for taking out flammable gases through concentric vents.

Brick flue

It is a typical traditional chimney stack usually made from red bricks. It is designed to remove smoke and combustible gases from fireplaces.

Power flue

Used at places where a building of flue chimney is impossible. It is a typical external fan added to the fireplace to eject the combustible gases forcefully. It is a type of automated fire control done via using microcontrollers.

Pre-fabricated flue

Pre-fabricated flue has a small cylindrical terminal on the top of the roof capable of accommodating all the gas fires.

Pre-cast flue

Build of clay and concrete. It is a type of rectangular crest vent metal terminal made on the rooftops. Identifying the type of flue chimney is essential and should be made according to the design of your roof and the type of fireplace in your house.

To ensure the proper functioning of your chimney, you should be aware of providing caps. Providing chimney caps has a lot of advantages in the maintenance of your chimney. It keeps the dampness from getting stuck in the chimney, works well for keeping birds and animals away and helps in stopping bad stench from the stack.

Combi boiler installation does not require installation of tanks, unlike other boilers. It does not require any bulk piping system as it is very efficient as a heating system. A combination boiler or a combi boiler is a sufficient boiler integrated with water heater and central heating boiler.

It provides you with hot water directly from the heating unit and does not require an additional piping system. The major disadvantage is the rate of water supply which is a little slower than other boilers. Another one is CORGI HomeHeat system (https://corgihomeheat.co.uk/) which is compact and can easily be fixed to the walls of the kitchen or any other room with no extra space needed for installation. It can provide with hot water just in 40 seconds.

Combi boiler installation needs no extra effort or cost; it's easy to install and maintain property makes it very popular in houses. Some benefits of installing combi boilers are: 

  1. Require no separate storage. 
  2. Can be used in providing hot water and central heating equipment. 
  3. Easy installation. 
  4. Less maintenance. 
  5. Requires less piping system since water is supplied directly from the central unit. 
  6. Reliable and higher efficiency than other boilers. 

If you own a small family, a combi boiler is best suited for your family. For better results always seek professional help for installation.

On the other hand, many retailers also like to try to make extra money by pretending to be more knowledgeable than they actually are about installation. While it is possible to save money hiring someone who is not certified but has a general understanding of the installation process, doing so is likely to cause problems in the future that will require expensive repairs or even cause damage to your home and property.